Diy String Light Pole Stand

She loved it so much, she requested a diy concrete stand to string lights in her backyard, too. Repeat the process for each of the planters.

Pin on Outdoor Lighting

Securely bolt, screw into your wooden deck or wedge anchor into your concrete patio.

Diy string light pole stand. I fell in love with them and decided to make my own version. Place pole in the middle of planter and pour the cement into the planter. In fact, she helped mix the concrete.

Our mom was the first to see the diy concrete project; Apply vegetable or motor oil to the inside of the tubes for lubrication. Sorelle for the home depot.

Fill tanks with sand or water and set them anywhere, outdoors or indoors. Vintage bulbs, with their exposed filaments, bring an industrial and timeless feel to these diy string light poles, designed by j. See more at sugar maple notes.

$10.00 coupon applied at checkout. Assembly (requires 2 people) find a level area to assemble the light poles. Stand conduit on end and hold in place.

Add concrete mix to the planter. Outdoor light poles amazon com. As i mentioned earlier, we weighted down the buckets and filled the empty space around the bucket with some old bricks.

Whether youre experienced with concrete or beginners like us, you can easily make this diy. Hang string lights with poles better homes gardens. Cut out and tape each cardboard circle to one end of its coinciding tube to create the molds for your bases.

Livingwithcolordesigns.com & savoringthegood.com & homedepot.com. Active time 2 hrs 30 mins. Assembly of the diy string light poles.

Make these simple diy planters to hang string lights in your backyard and enhance your landscaping. If youre on pinterest and you like outdoor lighting ideas youve probably seen the string light poles with concrete bases. After the planters were built and stained, and the light poles were securely set in their concrete, the assembly was simple.

For my four poles i got two bags of concrete (25 kilos each), four buckets, hooks and the string lights. According to your plan, determine the location and quantity of the string lights pole. You dont need a lot of things for this project.

Backyard light pole heser vtngcf org. Use a trowel or hand shovel to stir the mix. Amazon com iyn stands outdoor string light pole stand 9 6 ft.

Insert your pole into the concrete and brace between two pieces of wood balanced on equal height chairs with paint buckets holding it steady vertically. Outdoor lighting ideas for your backyard. 3.1 out of 5 stars.

Total time 3 hrs 30 mins. Attach to fence posts or railings with 2 brackets wooden screws. Attach lights to the screw eye using zip ties.

Add to favorites more colors wood planter box. Camouflage the wooden pole that holds up your string lights with a pretty potted plant. It should set up enough to let go of the conduit within a couple minutes.

Then add water according to the package instructions to create the correct consistency. I also got four beech poles but i was lucky to get these for free. After staining, we screwed in hooks at the top of the 22 pole.

Trace one end of each one of the pole bases you cut onto a flat piece of cardboard. We created rustic string light poles with a concrete base. Fill bucket 3/4 full with water.

This is the point of the planter build that i had to figure out how i was going to secure the light pole. This is the color we used on the planters, it is an exterior, 2 in one {paint & primer} paint so it will hold up to the outside elements. Its best to fill the planter just under halfway with concrete to ensure stability.

Leave your stands like this over night to set. Measure the distance will let you know what length of light strand you need. The heavy base of the planter helps keep things stable, while your flowers and greenery will add some eye candy to this set up.

Pin on Porches and outdoor decorating